Wall mounted Pro
AIO wall-mounted Pro units are slim and sleek. The Wall Mounted Pro can be mounted high or low with a factory-supplied bracket, making installation quick and simple. Special adapters enable the unit to be installed perpendicular to an outside wall, used with many louver styles, or even vented through an existing window frame with no construction required. An electronically controlled louver with an auto-swing function distributes airflow comfortably and uniformly. Wall Mounted pro units are ideal for any area with free wall space. The onboard touch controller simplifies use and installation. AIO Wall Mounted Pro is available with an optional ERV module. The extremely powerful exhaust fan with 0.45″ WC enables flexibility in venting and higher efficiency with better performance than the standard Wall Mounted unit
List price $3,595 / $5,670 with ERV
Note: List price does not include options such as electric heat, LCDI cords or wall controllers. Shipping is additional. Prices are subject to change.
Key Features
Key Features
compact unit
Easy to install
Paintable sleek cabinet
Electronically controlled air louver
Always-on back-lit LED dims after 15 seconds of inactivity
Auto-restart
Washable filters
Options
Optional 900 or 1,800w electric heat
With or without ERV
115v or 230V
Hardwire or LCDI cord
R32 or R410a
Operation
Cool, heat, dehumidify, and auto
Selectable fan speeds, low, med, high and auto.
Fresh air ERV – field configurable amount of fresh air
Mounting
High wall
Low wall
Sidewall with adapter
Multiple adapter options
Airflow
Dual 8′ external vents
Available 0.45″ WC for external ducting, adapters, and louvers
Included controls
Onboard touch controller
WiFi app for android and iPhone
Optional controllers
Wall Mounted Advanced touchscreen with a 7-day program
Wall Mounted Basic touch controller
3rd party thermostat interface
BACnet/Modbus interface
Key Specifications
| Cooling | Range | Btu/h | 3,400 – 15,500 |
|---|---|---|---|
| Nominal | Btu/h | 8,500 | |
| Heating 47° | Range | Btu/h | 4,300 – 15,700 |
| Nominal | Btu/h | 8,600 | |
| Heating 13°F | Range | Btu/h | 3,200 – 7,300 |
| Nominal | Btu/h | 6,900 | |
| Heating 5°F | Range | Btu/h | 2,800 – 6,800 |
| Nominal | Btu/h | 6,400 |
| Cooling | Sensible recovery | Btu/h | 220 | 350 | 500 |
|---|---|---|---|---|---|
| Latent recovery | Btu/h | 150 | 250 | 330 | |
| Input power | W | 8 | 15 | 30 | |
| Efficiency | EER/I | 16.12 | 13.68 | 9.70 | |
| Heating 47° | Recovery | Btu/h | 350 | 550 | 800 |
| Input power | W | 8 | 15 | 30 | |
| Efficiency | COP | 12.82 | 10.75 | 7.82 | |
| Heating 13° | Recovery | Btu/h | 930 | 1,480 | 21,50 |
| Input power | W | 8 | 15 | 30 | |
| Efficiency | COP | 34.07 | 28.92 | 21.00 | |
| Heating 5° | Recovery | Btu/h | 1,060 | 1,680 | 2,400 |
| Input power | W | 8 | 15 | 30 | |
| Efficiency | COP | 38.83 | 32.83 | 23.45 |
| Dimensions | with ERV | Net | 39.7” W x 21.9” H x 11” D |
| with ERV | Gross | 39.7” W x 21.9” H x 15” D | |
| w/o ERV | Net | 39.7” W x 21.9” H x 6.5” + 2″ fan D | |
| w/o ERV | Gross | 44” W x 26” H x 15” D | |
| Weight | with ERV | Net | 135 lb |
| with ERV | Gross | 140 lb | |
| w/o ERV | Net | 100 lb | |
| w/o ERV | Gross | 105 lb | |
| Cabinet | Finish | RAL 9003 signal white | |
| Material | Steel |
What’s inside
Airflow
AIO Wall Mounted Pro is extraordinarily flexible in how it can externally vent. A host of adapters are available that enable AIO Wall Mounted Pro to be installed in many scenarios, including on glass curtain walls with linear louvers, integrated window, and louver assemblies, or even with no construction using a windowsill adapter.
AIO Wall Mounted Pro
AIO Wall Mounted Pro with ERV module
AIO Wall Mounted Pro
AIO Wall Mounted Pro with ERV module
What’s inside
ERV
The AIO wall mounted ERV module adds fresh air and heat recovery to the wall mounted unit. No additional exterior vents are required, as the ERV module fits behind the AIO wall mounted and uses the same intake and exhaust vents. Treated and MERV 13 filtered fresh air is introduced into the room via the supply louver of the AIO wall mounted unit. Filter changes are easily done from the upper and lower access panel. The AIO wall mounted provides power for the ECM fans and electronics, so no additional power source is required. The Fresh air supply can be turned on and off and set the amount of fresh air from the onboard controller of AIO wall mounted unit. The ERV module works for both the standard and pro versions and adds 5″ to the total depth. Included extended side panels give the unit a clean finished look.
What’s inside ERV
What’s inside
Floor louver adapter
Floor louver adapter
The floor louver adapter enables AIO Wall Mounted Pro to vent through a sleek linear louver below the unit. The adapter is designed to fit inside a standard wall assembly or aluminum profile, so only the AIO is visible inside the room. On the exterior, all that is visible is a slim linear louver. The curved base assists the airflow while allowing any water penetrating the louvers to drip directly outside. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $380
Window assembly adapter
Window assembly adapter
The window louver assembly adapter enables AIO Wall Mounted Pro units to vent through a window/louver assembly (similar to an assembly used with PTACs), with a slim louver. The plenum box is designed to fit inside a standard shear wall or aluminum profile, so all that is visible is the AIO unit. This adapter works with wood and steel stud construction and is ideal for glass curtain wall construction. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $380
Windowsill adapter
Windowsill adapter
The windowsill adapter enables AIO Wall Mounted Pro units to be mounted on the wall below the window without any construction. It is ideal for retrofit installations where drilling vent holes in the facade isn’t feasible. Once installed, the window is still fully operable. Deeper side panels are available to conceal the adapter so that the assembly looks sleek and finished. A new windowsill of any material may be placed on top of the plenum box to complete the integration. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $380
High window adapter
High window adapter
The high window adapter enables the installation of Wall Mounted Pro units on the wall above the window without any construction. It is ideal for retrofit installations where it is not desirable to have AIO mounted below the window and where making an opening in the facade isn’t feasible. Once installed, the window is still fully operable. The plenum box’s base is curved, assisting airflow while allowing any water penetrating the louvers to drip outside. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $380
Sidewall adapter
Sidewall adapter
The sidewall adapter is ideal for applications where it’s not feasible or practical to mount AIO wall units on an exterior wall, venting directly out. With the sidewall adapter, the units can be mounted on a wall perpendicular to the outer wall in low-wall or high-wall positions using the sidewall adapter. The sidewall adapter is recessed into the wall. The sidewall adapter is available for right-side or left-side applications. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $ 380
Duo sidewall adapter
Duo sidewall adapter
The duo sidewall adapter is perfect for applications where it’s desirable to have two AIO Wall Mounted units back-to-back on a shared wall. Mounting inside the wall enables an AIO Wall Mounted pro unit to be installed on each side, in a high-wall or low-wall configuration. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $598
PTAC adapter
PTAC adapter
The PTAC adapter enables the Wall Mounted Pro unit to be mounted to an existing PTAC sleeve. The plate covers the entire PTAC sleeve opening (and half-inch on each side to cover any wall seams), sealing the PTAC opening entirely so there are no air leaks. No construction is required. This adapter is fully customizable and available through our certified part supplier, Thermaduct.
List price $380
